The Italian made Vortice Filo exhaust fan is available in 100mm, 125mm and 150mm sizes. This Vortice is suitable for wall or ceiling installation. The Filo models also features a built in back-draft shutter.
The Vortice Filo exhaust fan is a ductable fan. This model will need to be hardwired by an electrician unless you add a lead and plug that we can install for you. This makes for an easier installation. Please note however that if you purchase this exhaust fan and select for us to install a lead and plug for you, we cannot accept returns as this is a custom modification.
It is recommended to achieve a minimum of 10 air changes per hour in a bathroom, toilet or laundry, to remove excess moisture. To work out the recommended capacity needed for your room, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. (This will be adequate in most normal situations. We recommend that those clients who install in a bathroom who have a lot of glass and prefer to have warmer showers should get a fan double or more the recommended capacity.)
Note: If you install an exhaust fan with ducting, there will be a loss in capacity resulting in fewer air changes per hour.
Model with Capacity
100 – 85m3/hr (23.61 L/s) – Hole Size 100mm
125 – 175m3/hr (48.61 L/s) – Hole Size 120mm
150 – 335m3/hr (93.05 L/s) – Hole Size 156mm
In-built back-draft shutter
Vortice Filo Exhaust Fan Accessories Available
Lead and Plug – once a lead and plug is installed we cannot accept returns as this is a customisation
Vortice Exhaust Fan Features
- In-built back-draft shutter
- Three sizes
- Italian made
Vortice Filo Exhaust Fan 11123 / 11124 / 11125
The manufacturer offers a 2 Year Replacement Warranty (conditions apply).
**Fan & components must be installed by Qualified Persons unless a lead and plug is fitted for a DIY installation**