The Roof Ventilation Kit is designed to remove excess heat that may build up in the roof space and exhaust it out through the roof. The system in controlled by a thermostat (electrician required for installation) and has a 30 degree maximum operating temperature. The kit is supplied with a quality Mixflow fan with a ball bearing motor.
1 x TT200 Mixflow Inline Fan – EXVUTT200
1 x 6m 200mm duct – EDAI2006M
1 x 6m 150mm duct – EDAI1506M
1 x 200mm fixed vent – EVVUFS200
2 x 150 fixed vent – EVVUFS150
1 x 200-150 Reducer – EAVUPR1
2 x 200mm clamps (set of 2) – EAVUCL4
1 x 150mm clamps (set of 2) – EAVUCL3
1 x Simple Thermostat – ETVURT10
1 x 150mm cowl kit for metal roof or Tiled Roof (Depending on your choice)
About The Thermostat
This simple thermostat is used to control the fan found in Heat Transfer kits and systems. It can be used in heat and cool applications by wiring the thermostat as required – Electrician Required for installation. The thermostat does not use batteries.
It is usually placed in the same room as the heater so it will turn on the fan once that room is warm and the extra heat can be taken to other rooms. Once the temperature drops, because to much heat has been taken or the heater has been turned off, the thermostat will turn off the fan. Temperature adjustable from 10 – 30 degrees.
Capacity: 1040/830 m3/hr (289/230 l/s)
Max pressure: 350/275 Pa
Power used: 125/90 Watts
Noise: 52/45 dBA
Weight: 6.5 kg
IP rating: IPX4
2 Year Replacement (conditions apply).
**Fan & components must be installed by Qualified Persons unless a lead & plug is installed in which case the fan can be DIY installed**