The Roof Ventilation Kit is designed to remove excess heat that may build up in the roof space and exhaust it out to the eave. The system in controlled by a thermostat (electrician required for installation) and has a 30 degree maximum operating temperature. The kit is supplied with a quality Mixflow fan with a ball bearing motor.
1 x TT Mixflow 200 Inline Fan
2 x 6m High Quality Flexible duct 200mm
1 x 6m High Quality Flexible duct 150mm
1 x 200mm x 150mm Reducer
2 x 200mm Worm Clamps (Set of 2)
1 x 150mm Worm Clamps (Set of 2)
1 x 200mm Fixed Vent with Flyscreen
3 x 100mm – 150mm Fixed Vent with Flyscreen
1 x Simple Thermostat
About The Thermostat
This simple thermostat is used to control the fan found in Heat Transfer kits and systems. It can be used in heat and cool applications by wiring the thermostat as required – Electrician Required for installation. The thermostat does not use batteries.
It is usually placed in the same room as the heater so it will turn on the fan once that room is warm and the extra heat can be taken to other rooms. Once the temperature drops, because to much heat has been taken or the heater has been turned off, the thermostat will turn off the fan. Temperature adjustable from 10 – 30 degrees.
Capacity: 1040/830 m3/hr (289/230 l/s)
Max pressure: 350/275 Pa
Power used: 125/90 Watts
Noise: 52/45 dBA
Weight: 6.5 kg
IP rating: IPX4
2 Year Replacement (conditions apply).
**Fan & components must be installed by Qualified Persons unless a lead & plug is installed in which case the fan can be DIY installed**