The Maxair Wall Exhaust Fan is a wall mount exhaust fan that also features electric shutters to prevent back drafts. There is the option to have this as a pull-cord operated fan.
The Maxair Wall exhaust fan is supplied with an external grille and duct to join. Please note that auto-shutters will take approximately 30seconds to open and close.
The Maxair can either be hardwired by an electrician or you can select to have a lead and plug installed for you to make it a DIY install that will allow you to connect to a standard power point. Please bear in mind we are unable to accept returns for a change of mind if you select for a plug to be custom installed.
It is recommended to achieve a minimum of 10 air changes per hour in a bathroom, toilet or laundry, to remove excess moisture.
To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. (This will be adequate in most normal situations, we recommend that those clients who have a lot of glass and prefer to have warmer showers should get a fan double or more the recommended capacity)
Note: If you install an exhaust fan with ducting, there will be a loss in capacity resulting in fewer air changes per hour. Use the pressure curve graphs to work out the likely capacity drop across the duct run.
Sizes (with Capacity value)
150mm – 360 m3/hr (100 l/s) – 180mm hole size
200mm – 600 m3/hr (166.6 l/s) – 230mm hole size
The Maxair wall exhaust fan comes with electric auto shutters.
Maxair Accessories Available
Lead and Plug – Please Note: We are unable to accept returned fans that have a lead and plug installed as this is a custom addition.
Pull Cord – optional selection
Maxair Wall Exhaust Fan Features
- Electric shutters to prevent back drafts
- Pull cord option
MaxAir Wall Fans are easy to install and are supplied with unique duct-work that will easily fit walls between 110 and 310mm. No cable ties or tape is needed, as the duct attaches easily to the fan’s unique ‘duct grippers’. Both fans are configured to allow a flex and plug to be fitted or they can be wired direct.
The manufacturer offers a 3 year replacement warranty (conditions apply).
**Fan & components must be installed by Qualified Persons unless a lead & plug is installed in which case the fan can be DIY installed**