The Martec Profile Plus 4 Bathroom Exhaust, Heat and Light Combo features a stylish and sleek design. With a super slim profile, it is ideal for contemporary bathroom interiors.
It is a high extraction 3 in 1 bathroom heater and exhaust fan. The Martec Profile Plus LED incorporates a sleek modern design with the latest lighting technology. Featuring instant heat and 1500 lumens from the advanced energy efficient LED lamp fittings.
It is recommended to achieve a minimum of 10 air changes per hour in a bathroom, toilet or laundry, to remove excess moisture. To work out the recommended capacity needed for your room, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. (This will be adequate in most normal situations. We recommend that those clients who install in a bathroom who have a lot of glass and prefer to have warmer showers should get a fan double or more the recommended capacity.)
Note: If you install an exhaust fan with ducting, there will be a loss in capacity resulting in fewer air changes per hour. Use the pressure curve graphs to work out the likely capacity drop across the duct run.
460m3/hr (127.78 L/s)
- 1x 3-Gang Switch Included.
- Exhaust Fan with Side Ducting + Grill Included.
Martec Profile Plus 2 Exhaust Fan Features
- Excellent Airflow 460m3/h.
- Long life ball bearing motor.
- Quiet operation.
- Turbo Fan blade.
- Duct outlet (120mm diameter).
- Removable grill.
- 4x 275W Heat Lamps Included.
- 4x 9W 3000K Boss GU10 (MBGU3045) LED Lamps Included.
- Remote Control Adaptable.
Minimum ceiling depth of 210mm is required
Grill Size = 480mm x 360mm
Cut out Size = 435mm x 275mm
The manufacturer offers a 3 Year “In-home” Warranty (conditions apply, excludes lamps) – see manufacturer’s website for details.
**Fan & components must be installed by Qualified Persons unless a lead and plug is fitted for a DIY installation**