The E-Style Elicent Exhaust Fan is an Italian made wall or ceiling exhaust fan. The E-style models have a built in back draft shutter and a running light on the face cover.
It is recommended to achieve a minimum of 10 air changes per hour in a bathroom, toilet or laundry, to remove excess moisture.
To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan.
(This will be adequate in most normal situations. We recommend that those clients who have a lot of glass and prefer to have warmer showers should get a fan double or more the recommended capacity.)
Note: If you install an exhaust fan with ducting, there will be a loss in capacity resulting in fewer air changes per hour. Use the pressure curve graphs to work out the likely capacity drop across the duct run.
Sizes (with Capacity value)
100mm (95m3/hr or 26.39 L/s) – 100mm hole size
120mm (165m3/hr or 45.83 L/s) – 120mm hole size
150mm (295m3/hr or 81.94 L/s) – 150mm hole size
With Timer – Comes with up to 25 minute timer delay
Humidity Sensor and Timer – Comes with up to 25 minute timer delay and adjustable humidity sensor with control from 40 to 80% of R.H. The humidity sensor is designed for use in rooms such as bathrooms or laundries where appliance use results in a direct build up of humidity.
PIR Sensor and Timer – Comes with passive infra-red sensor to automatically activate the fan when movement is detected. Once fan turns on in continues to run for preset period as per timer setting.
The E-Style exhaust fan includes a built in back draft shutter and a running light on the face cover.
E-Style Accessories Available
Vent Fixed Flyscreen
Vent Fixed Louvre
Elicient E-Style Exhaust Fan Features
- Back draft shutter built-in
- PIR Sensor, Humidity Sensor and Timer Options
- Max 40degrees
Elicent E-Style Exhaust Fan 2MU7096 / 2MU7296 / 2MU7596
This Elicent exhaust fan comes with a 2 year replacement warranty (conditions apply).
**Fan & components must be installed by Qualified Persons**