The 150 Quiet is a quality Fanco product featuring a German made motor and modern design. The 150 quiet exhaust fan can be installed in either a ceiling or wall.
The fan can either be hardwired by an electrician or you can select to have a lead and plug installed for you to make it a DIY install that will allow you to connect to a standard power point. Please bear in mind we are unable to accept returns for a change of mind if you select for a plug to be custom installed.
It is recommended to achieve a minimum of 10 air changes per hour in a bathroom, toilet or laundry, to remove excess moisture.
To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan.
Note: this will be adequate in most normal situations. We recommend that those clients who have a lot of glass and prefer to have warmer showers should get a fan double or more the recommended capacity.
Note: If you install an exhaust fan with ducting, there will be a loss in capacity resulting in fewer air changes per hour. Use the pressure curve graphs to work out the likely capacity drop across the duct run.
150mm (315m3/hr or 87.57 L/s) – 155mm hole size
Power Consumption: 19w on high | 17w on low
Noise dB(A): 33 on high | 28 on low
This fan includes a built-in back draft shutter which stops warm air escaping and unwanted outside air coming through.
150 Quiet Accessories Available
Lead and Plug (The cord on this plug is 1m in length) – Please Note: We are unable to accept returned fans that have a lead and plug installed as this is a custom addition.
Vent Fixed Flyscreen
Vent Fixed Louvre
150 Quiet Exhaust Fan Features
- IP45 Rated
- Anti Vibration technology
- Good Capacity
- Back draft shutter built-in
- 230-240Vac 50Hz
The Fanco Quiet 150 offers a 2 year replacement warranty (conditions apply).
**Fan & components must be installed by Qualified Persons unless a lead & plug is installed in which case the fan can be DIY installed**